AngLevel Measuring, Leveling, Miter Finding Multi-Tool
Here is some interesting information on the AngLevel which looks like a multi-tool for leveling, measuring and finding miter angles. There is a pretty Cool Tools video below which highlights some of the features. The price is $40 which seems pretty good although haven’t had my hands on one to see if it’s well made or junk. You can buy them direct from www.toplineinnovations.com. More information and specs are below the video.
The product is very high quality, high resistance to wear and tear, made with stainless steel and fiberglass to withstand the rigors of a construction environment. This tool can be used as a:
- Angle Measurements (0° to 360° degrees)
- Pitch or Slope Measurements (1 to 20 pitch)
- 9-inch up to 16-inch Torpedo Level
- Rafter Square
- Sliding T-Bevel
- Plum Bob
- Compass
- Ruler
- 16-inch on center step-off.
Some of the Other Features Includes:
- 1/8-inch and 1/4-inch pitch (commonly used for drainage).
- There are 1 thru 20 pitch lines on the body of tool and it display's the degree at the same time with a degree dial that ranges from 0° to 90°degrees in 5°degree increments.
- There is a pitch-to-degree conversion table, for example a 10-pitch = 40°degrees, or 12-pitch = 45°degrees.
- The stainless steel ruler on the AngLevel™ tool spins 360° degrees and includes a compass feature.
- The compass feature enables the user to make circles from 2-inches to 30-inches in ½ inch increments.
- In addition the stainless steel ruler is 7-inches long etched in 1/16” inch increments.
- The ruler markings are ascending and descending on each side.
- The tool is 1.5" thick (thickness of a standard wood/steel 2x lumber, like a "2x4 stud") and is 3/4”, which is half of the stud thickness, which helps finding the center of the stud or the opposite edge of the 2x lumber or steel.
The AngLevel™ Differences
- All levels have vertical (plumb) and horizontal (level) indicators. The AngLevel™ is unique in that they have vertical and horizontal indicators, but also angle and pitch (slope) indicators. Unlike digital levels which are sensitive to drops, the AngLevel is durable and easy to use. There is no calibration required.
- With gravity-base levels, you can’t transfer the angle/pitch/slope to your saw or material; once you set it flat, those types of levels simply don’t work anymore!
- While other levels stop at 12 pitch, the AngLevel™ goes to 20 pitch. Our AngLevel measuring range goes from 0 to 360 degrees!
- At Topline Innovations, we pride ourselves in knowing that our AngLevel™ are made from high quality materials, as well as methodically constructed for accuracy and durability. Each level is hand inspected, precision tested and drop tested.
| Share |
|
