Bosch 18V Metal-Cutting Circular Saw CSM180

Metal-cutting circular saws are becoming more and more well-known by trades-people, and it’s easy to see why. Their ‘cold-cut’ produces little burring, fast cutting speeds, few sparks and of course, no heat.

It should be of no surprise then that Bosch have produced a cordless, light-weight metal saw for the job site. The CSM180 has a 5-3/8″ blade, with a cut depth of up to 2″. It weighs only 5.8 lbs with a high capacity 18V battery, and is extremely ergonomic in the hand. It is available as a bare tool CSM180B ($199) or in a kit with two 4Ah batteries CSM180-01 ($349).

Recommended building materials for use include: cable tray, uni-strut, sheet metal, threaded rod and pipes. The saw is equally capable in non-ferrous metals and steel. HVAC, electrical, plumbing and metal-fabrication workers on commercial building sites stand to benefit most.

It also does a great job cutting cutting plastic pipes, and for those wondering, yes it can cut timber too. However it is significantly slower in timber than regular circular saws, probably because the blade isn’t designed for timber.

Whilst the saw can be used to cut thicker metal materials, care should be taken to prolong the life of the blade teeth, as replacement blades are expensive. The reviewer tried cutting reinforcement mesh and destroyed several teeth by pushing too fast. The thicker the material, the greater the risk to the teeth.

For many tasks, a cold-cutting metal saw is superior to a grinder or reciprocating saw. A small list of the strengths and weaknesses of each for cutting metal is shown below:

Metal-Cutting Circular Saw:

  • Fastest cutting
  • Cleanest and straightest cuts
  • Few sparks
  • True one-handed tool
  • Very loud
  • Expensive replacement blades
  • Larger space for cut required

Angle grinder:

  • Cheap cutting discs
  • Most versatile
  • Fine metal dust
  • Hot materials & sparks

Reciprocating Saw:

  • No sparks
  • Wide range of blade types
  • Lots of vibration
  • Larger tool

One of the advantages of metal-cutting circular saws are the ability to make long straight cuts due to the conventional saw base, using either the included fence or a straight edge.

The hanging-hook and LED light are also very welcome features that will please regular users. The saw includes onboard storage for the blade-change hex key.

As these saws are very loud when cutting, hearing protection is an absolute must. The Bosch CSM180, like most of it’s competitors, lacks the ability to collect chips or make bevel cuts.

If you haven’t already tried one, it’s probably overdue to take the plunge.

Dwain is one of the guys from oztooltalk. You can find more of their videos at their youtube channel

For more on Bosch Tools and Accessories check out Ohio Power Tool or give their pro staff a call at 800-242-4424. 

 

Comments

comments

This entry was posted in Bosch, Construction Tools, Cordless Tools, Electrician Tools, HVAC Tools, Plumbing Tools and tagged , , , , , , , , , . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *