The next generations of Ridgid Sump Pumps will be coming soon and they will be build to be some of the best on the market. There will also be a separate backup system option that will be able to call or text you if the sump pump should lose power (center picture above). The backup system would require a cellular plan but for under $5/month it is probably worth the peace of mind. We’ve include some of the stats direct from Ridgid below. These high end units will not be offered in the box stores but should be available soon from plumbing suppliers and on the Ridgid Plumbing Tools page of Ohio Power Tool.
RS33/RS50 Sump Pumps
BENEFITS
- Durable cast iron housing and base for tough sump applications
- Upper and lower ball bearings in sealed oil bath for long life
- High performance, energy efficient motor lengthens the life of the switch and electrical components
- 360 Degree stainless steel float guard protects float operation from obstruction
- Easy install no need to drill a weep hole in the discharge pipe
SPECIFICATIONS
- 11/2 in. NPT Discharge (Industry Standard)
- Solids handling – up to 1/2 in.
- Top suction intake filters debris for increased reliability – no air locks
- Fits basins 11″ or larger
- Energy efficient, oil filled motor
- Cast iron pump housing and base for abrasion resistance and longer life
- Carbon/ceramic shaft seal
- Stainless steel fittings and impeller plates for corrosion resistance
- 8 ft. Power cord
- Weight: 20 lbs.
- 3 Year Limited Warranty
Discharge – Gallons Per Minute
height – 5 ft. / 10 ft. / 15 ft. / 20 ft.
47348 – RS33 – 1/3 HP – 60 / 48 / 36 / 14
47343 – RS50 – 1/2 HP – 70 / 58 / 44 / 26
47338 – RS75 – 3/4 HP – 80 / 68 / 55 / 40
EFFLUENT PUMPS
XD PRO EFFLUENT PUMPS
- Rugged cast-iron construction features a 1/2″ solids-handling capacity and 20′ piggyback power cord to easily remove grey water (soiled) from septic tanks, sump pits or laundry tray systems.
- 1/2″ solids-handling capacity, thermally protected pump
- Energy efficient, oil-filled motor
- 20’ piggyback power cord for automatic or manual operation
- Top suction intake filters debris for increased reliability
- 11/2″ discharge for easy installation and compliance to building codes
- 11″ footprint allows installations into basins 11″ or wider
- Stainless steel fittings and impeller plates for corrosion resistance
- Carbon/ceramic shaft seal for longer life
- Upper and lower sealed ball bearings for quiet performance and long life
- 3-year limited warranty
Discharge – Gallon Per Minute
Height – 5 ft. / 10 ft. / 15 ft. / 20 ft.
47308 – RE33 – 1/3 HP – 60 / 48 / 36 / 14
47303 – RE50 – 1/2 HP – 70 / 58 / 44 / 26
SEWAGE PUMPS
XD PRO SEWAGE PUMPS
- Rugged cast-iron construction features a 2″ solids-handling capacity and a high performance PSC motor designed to accommodate single-family homes, multiple-family homes and small commercial applications.
- Vertical float switch for automatic operation
- Vortex impeller generates high flow rates while handling up to 2″ diameter solids
- Cast-iron motor and pump housing
- Ceramic/carbon seal for maximum life
- Upper bronze bearing and lower ball bearing for quiet performance and long life
- Designed for residential and light commercial sewage applications
- Ideal for basement or below grade installations
- Designed for 18″ diameter or larger sewage basins
- Snap-action mechanical or tethered float switch
- Engineered flow director, shaped to prevent debris from interfering with switch operation.
- 3-year limited warranty
47293 – RW50T 1/2 HP Sump Pump 130 GPM @ 5′ (tether)
47398 – RW50V 1/2 HP Sump Pump 130 GPM @ 5′ (float)
