Category Archives: Milwaukee

The Next Milwaukee Breakthrough Is Here: The World’s First 18V Table Saw!

I’m really excited about this one. When I was at NPS18 and Milwaukee announced their new M18 Table Saw, I was reaching for my wallet… Seriously, I’ve already pre-ordered mine. (more…)

At 2:41 PM | Posted in Milwaukee | Leave a comment

Milwaukee NPS18 What is Coming & What We Didn’t See

Milwaukee NPS18

We’re going to start this off with what we didn’t see at Milwaukee’s NPS18 event before jumping into all the good stuff. Of course everyone has a ton of wants, needs and guess on what new products are getting launched at these events but they can only do so much. Steve Richman, Milwaukee’s President got up and said the answer is YES we are going to make that; for pretty much any (logical) tool you are asking about just a matter of time. So For this year’s event no M18 tracksaw, no M18 trim routers, no cordless M18 framing nailer, no new M18 drain cleaning/plumbing, no M18 lawn mower and no revival of the Titan Workcarts. But we did see a ton of exciting stuff and PRE-SALE M18 Tools are already up!!!!


(more…)

At 3:30 PM | Posted in Milwaukee | 3 Comments

Milwaukee Tool – Mega MAY Super Sales NPS18!

May is here, already! Milwaukee is releasing a huge pile of promotions beginning tomorrow (May 1st) just ahead of their big product launch event #NPS18 (New Product Symposium). Looking to take advantage of all the excitement this event generates they are launching some very aggressive deals. Various promotions from buy one, get one (BOGO), sale pricing drops, rebates and more. Now is the time to pick up that Milwaukee Tool you’ve been waiting for. There are too many deals to keep track of so we tried to list out the big one’s here.  (more…)

At 5:35 PM | Posted in Milwaukee | 2 Comments

Milwaukee Carbide Circular Saw Blades Reboot

Milwaukee Circular Saw Blades

As we speak Milwaukee is shipping their new line up of Carbide Circular Saw Blades for wood-cutting and fiber cement with polycrystalline diamond (PCD) tips which covers just about any size and application for construction. From 5-3/8” to 12” with basic rip blades to 100 teeth finish blades, they got all the bases covered. This is a very logical step for Milwaukee with what must be hundreds of thousands of circular saws, miter saws and hopefully someday they’ll have a table saw as well, all those saws need blades. It doesn’t make any sense for them not to have a premium blade lineup.


(more…)

At 10:05 AM | Posted in Milwaukee | 1 Comment

Milwaukee ANSI Level Cut 1, Cut 3 & Cut 5 Gloves

Cut resistance is important, in any trade. Our hands are the money makers, don’t risk hurting them. Milwaukee is releasing new dipped & cut resistant gloves. We’re going to review key features of these 3 new gloves, touch base on ANSI levels and figure out which set of gloves work best for you.  (more…)

At 3:21 PM | Posted in Milwaukee | Leave a comment

Safe Cracking with Milwaukee Carbide Torch & Carbide HoleDozer

Carbide Sawzall Blades

We just received this Milwaukee PACKOUT sample case and challenge to use the accessories to do the #CarbideGaunet. While drilling through some nail embedded wood or rebar a few hundred time sounds like fun we really wanted to see if these could handle something a little more challenging, like getting into a safe! Certainly those have to be tough right, are these new accessories tough enough to drill thought the locking mechanism or cut through the entire safe?

(more…)

At 5:06 PM | Posted in Metalworking Tools, Milwaukee | 1 Comment

Milwaukee M12 Cordless Ratchet 2557-21

The Milwaukee M12 Cordless Ratchet replaces it’s previous brushed motor Ratchet. Providing more power and better run time, this brushless M12 feels all kind of right in our hands. The bare tool at only $149 or the 2557-21 with 1 battery kit at $199 has 55lbs of max torque and 200RPM to keep cranking out the work.  (more…)

At 12:08 PM | Posted in Milwaukee | Leave a comment

Milwaukee 2nd Generation M12 Hammer Drill (2504) and Impact Driver (2553)

Milwaukee released a new generation M12 Hammer Drill and Impact Driver a couple months back. We’ve played with them a bit and man they were impressive. All the same power as it’s previous model, now in a smaller package. Cutting off over an inch of length and dropping a few ounces, these new tools are feeling great.

(more…)

At 11:32 AM | Posted in Milwaukee | Leave a comment

SDS MAX Cordless Hammer Drill Shootout! Dewalt vs. Makita vs. Milwaukee

Ladies and gentlemen, boys and girls, and children of all ages. Leeet’s get ready to HAMMER!!!

Dewalt FlexVolt (DCH481X2)
vs.
Makita AVT AWS (XRH07PTU)
vs.
Milwaukee M18 Fuel (2717-21HD)

(more…)

At 2:28 PM | Posted in DeWalt Tools, Makita Tools, Milwaukee | 3 Comments

Milwaukee 5 core Video/Data/Voice Hand Tools

Punch it out with the Milwaukee Video/Data/Voice Hand Tools. As you know, that internet thing really took off. Data cables are being pulled everywhere, it’s the fastest growing segment of the electrical industry. Introducing 5 core hand tools that will allow you to cut, strip, and terminate CAT3-CAT6 Ethernet cabling more efficiently and effectively. There is a lot of Data Comm tool options out there. However, if you’re pulling/punching cable and love that Milwaukee red, this is perfect for you!

48-22-2165 Punchdown Tool with Extended Blade $79.99
48-22-2145 4-in-1 Multi Pick $14.99
48-22-4045 Electrician Snips $24.99
48-22-3075 Ratcheting Modular Crimper $69.99
48-22-3065 Universal Twisted Pair (UTP) Stripper $14.99
48-22-2166 Extended Punchdown Blade $24.99
48-22-2167 110/66 Punchdown Blade $15.99

(more…)

At 12:19 PM | Posted in Milwaukee | Leave a comment