Tag Archives: Milwaukee tools

New Milwaukee M18 Angle Grinder, Levels & More

M18 6-inch Grinder
Milwaukee set their sights on March and April of 2019 to launch 4 new products. First up is the new M18 Fuel 4 ½ – 6” Braking Angle Grinder 2980, adding a 6” option to Milwaukee’s already robust lineup of 5” and 9” cordless grinders. Among its most impressive features are its ability to stop any accessory within 3 seconds utilizing their “Rapid Stop Technology”, and the strength to generate up to 13 amps of corded power. Pre-orders will be available soon at OhioPowerTool.com.
(more…)

At 11:41 AM | Posted in Uncategorized | Leave a comment

Power Tool Week In Review Ep124 | New Milwaukee Battery, Dewalt Reviews, Klein News, Hikoki Launches & More

Dewalt enters the cooler market as Hilti heats up their new gas-powered 12” saw. Hitachi… Or HiKOKI has a multi-volt battery platform, and we give away a new Bosch Bluetooth speaker. View this and more on YOUR Power Tool Week In Review, Episode 124. (more…)

At 12:05 PM | Posted in Week In Review | 2 Comments

GOT COLD BEER? Milwaukee VS Klein Jobsite Cooler Head 2 Head Shootout

Scott cracks a few (or more) open to see which cooler is the coolest! So, we throw a six pack in the Milwaukee Jobsite Soft-Side Cooler 48-22-8250 and the Klein Jobsite Soft-Sided Cooler 55601, wait 12 hours and let the testing commence.  (more…)

At 3:13 PM | Posted in Klein Tools, Milwaukee | 1 Comment

Milwaukee NPS18 What is Coming & What We Didn’t See

Milwaukee NPS18

We’re going to start this off with what we didn’t see at Milwaukee’s NPS18 event before jumping into all the good stuff. Of course everyone has a ton of wants, needs and guess on what new products are getting launched at these events but they can only do so much. Steve Richman, Milwaukee’s President got up and said the answer is YES we are going to make that; for pretty much any (logical) tool you are asking about just a matter of time. So For this year’s event no M18 tracksaw, no M18 trim routers, no cordless M18 framing nailer, no new M18 drain cleaning/plumbing, no M18 lawn mower and no revival of the Titan Workcarts. But we did see a ton of exciting stuff and PRE-SALE M18 Tools are already up!!!!


(more…)

At 3:30 PM | Posted in Milwaukee | 3 Comments

Safe Cracking with Milwaukee Carbide Torch & Carbide HoleDozer

Carbide Sawzall Blades

We just received this Milwaukee PACKOUT sample case and challenge to use the accessories to do the #CarbideGaunet. While drilling through some nail embedded wood or rebar a few hundred time sounds like fun we really wanted to see if these could handle something a little more challenging, like getting into a safe! Certainly those have to be tough right, are these new accessories tough enough to drill thought the locking mechanism or cut through the entire safe?

(more…)

At 5:06 PM | Posted in Metalworking Tools, Milwaukee | 1 Comment

Milwaukee M12 FUEL – Gen 2 is Here!

M12 FUEL Cordless

The new M12 FUEL generation 2 Drill/Drivers, Impacts & Combo Kits are now coming in! Back in 2013, Milwaukee first introduced their M12 drilling and driving solutions, which set the benchmark for the sub-compact industry in a couple ways:

  • They utilized the most advanced POWERSTATE™ Brushless technology available at the time, reshaping perceptions of performance and capabilities of 12V tools.
  • They were the most compact in their class.

Milwaukee continues to demonstrate their market leadership position by driving the 12V technology and as they always say, leaders never rest of their laurels. As technology evolves, they’ve constantly drive for new ways to push forward the M12™ drilling and driving experience. Their technology and capabilities reached new heights since 2013 and come January 2018, they’re setting the benchmark once again with the next generation of M12™ drill and driving.

(more…)

At 1:51 PM | Posted in Cordless Tools, Milwaukee | 1 Comment

Milwaukee M12 Cordless Soldering Iron 2488-21

2488-21 M12 Soldering Gun

There has not been much innovation in the soldering iron category recently however that is all about to change with the launch of the Milwaukee M12 Cordless Soldering Gun 2488-20 ($69, bare) and 2488-21 ($129, kit). With this tool you get 18 second heat up time and up to 40 minutes runtime with an M12 Compact Battery which is pretty increasable. We had a brief chance to use this tool at the New Product Symposium, see video below, but it will be hitting the market this month (November).

(more…)

At 5:33 PM | Posted in Electrician Tools, Milwaukee | 1 Comment

Behind The Scenes Tour – Milwaukee Sawzall Manufacturing U.S. Plant

Coptool had the privilege in touring Milwaukee’s Sawzall manufacturing facility in Greenwood Mississippi. We had the opportunity to see their manufacturing processes, printing capabilities, engineering processes as well as understand the culture in Greenwood. Produced in the same facility, we saw step by step, how their world class Hole Dozers were made and engineered. Being the first time Milwaukee invited media guest to Greenwood, Milwaukee’s president of Power Tool Accessories, Scott Griswold kicked off the event in style!

(more…)

At 5:09 PM | Posted in Milwaukee | Leave a comment

Milwaukee Tool 3/8” Socket Sets SAE & Metric

Milwauke 3/8 Socket Set

As Milwaukee Tool continues to expand upon their Hand Tool arsenal Chrome Socket Sets does seem like the next logical step. While these sockets sets are traditionally considered “mechanics tools” every electrician, plumber, HVAC, service tech and the list goes on, has a socket set in their bag or truck. Milwaukee’s new Contractor ratchet and socket sets, both SAE 48-22-9000 & Metric 48-22-9001 are designed for this market. The sets use a 3/8” ratchet with a pivoting head ideal for tight spaces and eight common deep sockets with some additional extensions/adapters. Priced at $69 each and should be here in April!   (more…)

At 5:23 PM | Posted in Hand Tools, Milwaukee | 1 Comment

Milwaukee Tool Framing Hammers Spring 2017

Milwaukee Framing Hammers

We have been waiting for many years for the Milwaukee Framing Hammers, ever since they acquired the premium Stiletto Hammer line it seemed like a logical way to expand their offering. Launching in April there will be 5 new hammers: two 17oz hammers 48-22-9016 milled face $39, 48-22-9017 smooth face $39, as well as two 22oz hammers 48-22-9022 milled face $35, 48-22-9023 smooth face $35 and final a poly/fiberglass 19oz hammer smooth face $29. There is a lot of technology that went into these hammers for great balance, vibration reduction, durable construction, nail setting magnet and of course trying to reduce the weight as much as possible. (more…)

At 4:45 PM | Posted in Hand Tools, Milwaukee | 3 Comments