Tag Archives: OSHA safety
Continuing our coverage of Milwaukee’s 2019 NPS let’s look at the expanded line of PPE safety gear including new hard hats, safety glasses, high visibility safety vests, respirators, hearing protection, more tool lanyards, and cut resistant glove expansion. Check out our videos from the NPS and information below.
At 4:23 PM ||
As many of you know this week (May 6-10) is National Safety Stand-Down Week! A big focus of this effort traditionally is on Fall Hazards and Fall Prevention, but for those not exposed to fall risk still a great time for employers to talk about safety hazards they face on the jobsite. Our friends at FallTech are extremely busy this week doing multiple presentations everyday in our area and across the country with partners like Ohio Power Tool, doing the ABCD’s of Fall Protection. This year showing off their new addition, the UniDriver Rescue System which is an impressive piece of life saving technology.
At 12:05 PM ||
Fall protection equipment is an essential part of any jobsite when it comes to working at heights. Crazy to imagine 11 people died building the Golden Gate Bridge and that was celebrated as a huge safety accomplishment. In the 1930’s the rule of thumb was 1 death per $1 million of project cost, at $35 million total the expectation was 35 people might die to get the job done (history.com). Today thankfully 1 death is too many when it comes to preventable injuries and as we learn more the technology improves. Leading Edge technology for SRLs is where many companies are headed to keep workers safe. (more…)
At 1:33 PM ||
Now that we are less than a month away from the September 23rd deadline we are seeing a lot more interest about the new OSHA Silica Rules which is good that people are taking this seriously. One of the big debates that has recently popped up, some manufacturers are telling their own customers that they will not support “Objective Data” and everything must be “Table 1”. This is also a commitment to not look at all the options for the safest possible solutions or to develop new tools/solutions in many key areas. The good news is OSHA (the people who make the decisions) wrote a pretty clear 26 page document §1926.1153 which provides 3 ways to be compliant for companies who will continue to innovate in this space; Table 1, Objective Data and Self-Monitoring Program. (more…)
At 11:30 AM ||
This week is OSHA’s National Safety Stand Down Week, held each year to bring awareness to the leading cause of fatalities for construction employees, falls from elevation. This week, May 8th – 12th nationwide for more information visit OSHA.gov/stopfallsstanddown. (more…)
At 10:22 AM ||
The latest edition of On the Job Safety Tips with Safex is up and this time we took a look at Ladder Safety and Inspection tips. Ladders are on OSHA’s top 10 safety violations year after year which means you certainly want to keep up to avoid any citations but more importantly you want to stay safe and ensure others around are safe as well. Travis from Safex reviews some of the dos and don’ts of ladders as well as some tips on ladder inspections. Of course you should always contact a safety profession with any specific questions.
At 2:39 PM ||
When you or your workers are up in the air working at a height, it is imperative to ensure not only that you use fall protection equipment, but that you use the right fall protection equipment. A fall prevention system is composed of an Anchor, a Body harness, and a Connector, often being a lanyard with a deceleration or energy absorbing mechanism. In this article we will discuss some of the differences among SRLs (self-retracting lifelines), how to go about choosing the proper one for the job and the differences between Class A & Class B in SRLs. (more…)
At 5:37 PM ||
With the new OSHA Silica Dusts rules getting ever closer there has been a lot of scrambling for manufacturers and users to get the right solutions in place. The good news is the June 23rd deadline has been pushed back 90 days to September 23, 2017 allowing for some more solutions to hit the market. Milwaukee Tool has just announced it will have a new 8 gallon HEPA dust extractor vacuum with self-cleaning filters and 148 CFM out well before the new deadline. (more…)
At 11:44 AM ||
The original deadline for issuing OSHA fines was June 23rd however with that deadline very near the amount of unanswered questions and many tasks that still not having good solutions OSHA has announced everyone will get an additional 90 days before fines will begin. (OHSA full press release) This is good news, manufacturers of solutions to control silica dust are just now finishing testing, releasing products and as they come out are seeing immediate back orders. Training thousands and thousands of effected workers is also not an easy task and will take some time, even with the extra 90 days it will be a challenge. (more…)
At 9:10 AM ||
**** OSHA UPDATE 4/7/2017 – New OSHA Deadline is September 23, 2017 for Silica Dust Compliance as there was a 90 day extension added.
As the OSHA’s silica June 23, 2017 compliance deadline is rapidly approaching, do you know which dust collection vacuum complies? Do you know how often filters need to be changed? Do you know the filter efficiency standard? If you answered no to any of these questions, don’t worry, in today’s Coptool post we will discuss OSHA’s silica regulation and approved products to ensure you’re in compliance!
OSHA has issued two standards in an effort to protect millions of construction workers from crystalline silica – one for construction and the other for general industry and maritime. Throughout this post, we will be focusing on the construction standard. OSHA recognizes that current silica regulations do not provide adequate protection for construction workers. With the new standard, OSHA is reducing the permissible exposure limit to 50 micrograms per cubic meter of air over 8 hour time weighted average. Basically 1/5 of the previous standard of 250 micrograms per cubic meter of air over 8 hour time weighted average. Check out the Pulse-Bac Vacuum video above, they do the best job we have seen for outlining the basic details.
At 1:23 PM ||